ancestor: null
releases:
  0.1.0:
    changes:
      minor_changes:
      - facts - now also collecting data about BGP and OSPF (https://github.com/ansible-collections/community.network/pull/101).
      - facts - set configuration export on to verbose, for full configuration export
        (https://github.com/ansible-collections/community.network/pull/104).
      release_summary: 'The ``community.routeros`` continues the work on the Ansible
        RouterOS modules from their state in ``community.network`` 1.2.0. The changes
        listed here are thus relative to the modules ``community.network.routeros_*``.

        '
    fragments:
    - 0.1.0.yml
    - 101_update_facts.yml
    - 104_facts_export_verbose.yml
    release_date: '2020-10-26'
  0.1.1:
    changes:
      bugfixes:
      - api - fix crash when the ``ssl`` parameter is used (https://github.com/ansible-collections/community.routeros/pull/3).
      release_summary: Small improvements and bugfixes over the initial release.
    fragments:
    - 0.1.1.yml
    - 3-api-ssl.yml
    release_date: '2020-10-31'
  1.0.0:
    changes:
      bugfixes:
      - routeros terminal plugin - allow slashes in hostnames for terminal detection.
        Without this, slashes in hostnames will result in connection timeouts (https://github.com/ansible-collections/community.network/pull/138).
      release_summary: 'This is the first production (non-prerelease) release of ``community.routeros``.

        '
    fragments:
    - 1.0.0.yml
    - community.network-138-routeros-allow-slash.yml
    release_date: '2020-11-17'
  1.0.1:
    changes:
      bugfixes:
      - api - remove ``id to .id`` as default requirement which conflicts with RouterOS
        ``id`` configuration parameter (https://github.com/ansible-collections/community.routeros/pull/15).
      release_summary: Maintenance release with a bugfix for ``api``.
    fragments:
    - 1.0.1.yml
    - 13-remove-id-restriction-for-api.yaml
    release_date: '2020-12-11'
  1.1.0:
    changes:
      minor_changes:
      - command - added support for a dash (``-``) in username (https://github.com/ansible-collections/community.routeros/pull/18).
      - facts - added support for a dash (``-``) in username (https://github.com/ansible-collections/community.routeros/pull/18).
      release_summary: This release allow dashes in usernames for SSH-based modules.
    fragments:
    - 1.1.0.yml
    - 18-support-dashes-in-username.yml
    release_date: '2021-01-04'
  1.2.0:
    changes:
      bugfixes:
      - api - when using TLS/SSL, remove explicit cipher configuration to insecure
        values, which also makes it impossible to connect to newer RouterOS versions
        (https://github.com/ansible-collections/community.routeros/pull/34).
      minor_changes:
      - Avoid internal ansible-core module_utils in favor of equivalent public API
        available since at least Ansible 2.9 (https://github.com/ansible-collections/community.routeros/pull/38).
      - api - add options ``validate_certs`` (default value ``true``), ``validate_cert_hostname``
        (default value ``false``), and ``ca_path`` to control certificate validation
        (https://github.com/ansible-collections/community.routeros/pull/37).
      - api - rename option ``ssl`` to ``tls``, and keep the old name as an alias
        (https://github.com/ansible-collections/community.routeros/pull/37).
      - fact - add fact ``ansible_net_config_nonverbose`` to get idempotent config
        (no date, no verbose) (https://github.com/ansible-collections/community.routeros/pull/23).
      release_summary: Bugfix and feature release.
    fragments:
    - 1.2.0.yml
    - 23-idempotent_config.yml
    - 34-api-ciphers.yml
    - 37-api-validate-cert-options.yml
    - ansible-core-_text.yml
    release_date: '2021-06-29'
  2.0.0:
    changes:
      minor_changes:
      - command - the ``commands`` and ``wait_for`` options now convert the list elements
        to strings (https://github.com/ansible-collections/community.routeros/pull/55).
      - facts - the ``gather_subset`` option now converts the list elements to strings
        (https://github.com/ansible-collections/community.routeros/pull/55).
      release_summary: A new major release with breaking changes in the behavior of
        ``community.routeros.api`` and ``community.routeros.command``.
    fragments:
    - 2.0.0.yml
    - 55-linting.yml
    release_date: '2021-10-31'
  2.0.0-a1:
    changes:
      breaking_changes:
      - 'api - due to a programming error, the module never failed on errors. This
        has now been fixed. If you are relying on the module not failing in case of
        idempotent commands (resulting in errors like ``failure: already have such
        address``), you need to adjust your roles/playbooks. We suggest to use ``failed_when``
        to accept failure in specific circumstances, for example ``failed_when: "''failure:
        already have '' in result.msg[0]"`` (https://github.com/ansible-collections/community.routeros/pull/39).'
      release_summary: First prerelease for a new major release with a breaking change
        in the behavior of ``community.routeros.api``.
    fragments:
    - 2.0.0-a1.yml
    - 39-api-fail.yml
    release_date: '2021-07-31'
  2.0.0-a2:
    changes:
      breaking_changes:
      - api - splitting commands no longer uses a naive split by whitespace, but a
        more RouterOS CLI compatible splitting algorithm (https://github.com/ansible-collections/community.routeros/pull/45).
      - command - the module now always indicates that a change happens. If this is
        not correct, please use ``changed_when`` to determine the correct changed
        status for a task (https://github.com/ansible-collections/community.routeros/pull/50).
      bugfixes:
      - api - improve splitting of ``WHERE`` queries (https://github.com/ansible-collections/community.routeros/pull/47).
      - api - when converting result lists to dictionaries, no longer removes second
        ``=`` and text following that if present (https://github.com/ansible-collections/community.routeros/pull/47).
      - routeros cliconf plugin - adjust function signature that was modified in Ansible
        after creation of this plugin (https://github.com/ansible-collections/community.routeros/pull/43).
      minor_changes:
      - api - make validation of ``WHERE`` for ``query`` more strict (https://github.com/ansible-collections/community.routeros/pull/53).
      release_summary: Second prerelease for a new major release with breaking changes
        in the behavior of ``community.routeros.api`` and ``community.routeros.command``.
    fragments:
    - 2.0.0-a2.yml
    - 43-sanity.yml
    - 45-api-split.yml
    - 47-api-split.yml
    - 50-command-changed.yml
    - 53-api-where.yml
    - 53-quoting-filters.yml
    plugins:
      filter:
      - description: Join a list of arguments to a command
        name: join
        namespace: null
      - description: Convert a list of arguments to a list of dictionary
        name: list_to_dict
        namespace: null
      - description: Quote an argument
        name: quote_argument
        namespace: null
      - description: Quote an argument value
        name: quote_argument_value
        namespace: null
      - description: Split a command into arguments
        name: split
        namespace: null
    release_date: '2021-10-14'
  2.1.0:
    changes:
      bugfixes:
      - query - fix query function check for ``.id`` vs. ``id`` arguments to not conflict
        with routeros arguments like ``identity`` (https://github.com/ansible-collections/community.routeros/pull/68,
        https://github.com/ansible-collections/community.routeros/issues/67).
      - quoting and unquoting filter plugins, api module - handle the escape sequence
        ``\_`` correctly as escaping a space and not an underscore (https://github.com/ansible-collections/community.routeros/pull/89).
      minor_changes:
      - Added a ``community.routeros.api`` module defaults group. Use with ``group/community.routeros.api``
        to provide options for all API-based modules (https://github.com/ansible-collections/community.routeros/pull/89).
      - Prepare collection for inclusion in an Execution Environment by declaring
        its dependencies (https://github.com/ansible-collections/community.routeros/pull/83).
      - api - add new option ``extended query`` more complex queries against RouterOS
        API (https://github.com/ansible-collections/community.routeros/pull/63).
      - api - update ``query`` to accept symbolic parameters (https://github.com/ansible-collections/community.routeros/pull/63).
      - api* modules - allow to set an encoding other than the default ASCII for communicating
        with the API (https://github.com/ansible-collections/community.routeros/pull/95).
      release_summary: Feature and bugfix release with new modules.
    fragments:
    - 2.1.0.yml
    - 63-add-extended_query.yml
    - 68-fix-query-id-check.yml
    - 83-ee.yml
    - 89-quoting.yml
    - 90-api-action-group.yml
    - 95-api-encoding.yml
    modules:
    - description: Collect facts from remote devices running MikroTik RouterOS using
        the API
      name: api_facts
      namespace: ''
    - description: Find and modify information using the API
      name: api_find_and_modify
      namespace: ''
    release_date: '2022-05-25'
  2.2.0:
    changes:
      bugfixes:
      - Include ``LICENSES/BSD-2-Clause.txt`` file for the ``routeros`` module utils
        (https://github.com/ansible-collections/community.routeros/pull/101).
      minor_changes:
      - All software licenses are now in the ``LICENSES/`` directory of the collection
        root. Moreover, ``SPDX-License-Identifier:`` is used to declare the applicable
        license for every file that is not automatically generated (https://github.com/ansible-collections/community.routeros/pull/101).
      release_summary: New feature release.
    fragments:
    - 101-licenses.yml
    - 2.2.0.yml
    modules:
    - description: Retrieve information from API
      name: api_info
      namespace: ''
    - description: Modify data at paths with API
      name: api_modify
      namespace: ''
    release_date: '2022-07-31'
  2.2.1:
    changes:
      bugfixes:
      - api_modify, api_info - make API path ``ip dhcp-server lease`` support ``server=all``
        (https://github.com/ansible-collections/community.routeros/issues/104, https://github.com/ansible-collections/community.routeros/pull/107).
      - api_modify, api_info - make API path ``ip dhcp-server network`` support missing
        options ``boot-file-name``, ``dhcp-option-set``, ``dns-none``, ``domain``,
        and ``next-server`` (https://github.com/ansible-collections/community.routeros/issues/104,
        https://github.com/ansible-collections/community.routeros/pull/106).
      release_summary: Bugfix release.
    fragments:
    - 106-api-path-ip-dhcp-network.yml
    - 107-api-path-ip-dhcp-lease.yml
    - 2.2.1.yml
    release_date: '2022-08-20'
  2.3.0:
    changes:
      bugfixes:
      - api_modify, api_info - make API path ``ip dhcp-server`` support ``script``,
        and ``ip firewall nat`` support ``in-interface`` and ``in-interface-list``
        (https://github.com/ansible-collections/community.routeros/pull/110).
      minor_changes:
      - The collection repository conforms to the `REUSE specification <https://reuse.software/spec/>`__
        except for the changelog fragments (https://github.com/ansible-collections/community.routeros/pull/108).
      - api* modules - added ``timeout`` parameter (https://github.com/ansible-collections/community.routeros/pull/109).
      - api_modify, api_info - support API path ``ip firewall mangle`` (https://github.com/ansible-collections/community.routeros/pull/110).
      release_summary: Feature and bugfix release.
    fragments:
    - 109-add-timeout-parameter-to-api.yml
    - 110-api.yml
    - 2.3.0.yml
    - licenses.yml
    release_date: '2022-09-11'
  2.3.1:
    changes:
      known_issues:
      - The ``community.routeros.command`` module claims to support check mode. Since
        it cannot judge whether the commands executed modify state or not, this behavior
        is incorrect. Since this potentially breaks existing playbooks, we will not
        change this behavior until community.routeros 3.0.0.
      release_summary: Maintenance release with improved documentation.
    fragments:
    - 2.3.1.yml
    - command-check_mode.yml
    release_date: '2022-11-06'
  2.4.0:
    changes:
      bugfixes:
      - api_modify - ``ip route`` entry can be defined without the need of ``gateway``
        field, which is correct for unreachable/blackhole type of routes (https://github.com/ansible-collections/community.routeros/pull/131).
      - api_modify - ``queue interface`` path works now (https://github.com/ansible-collections/community.routeros/pull/131).
      - api_modify, api_info - removed wrong field ``dynamic`` from API path ``ipv6
        firewall address-list`` (https://github.com/ansible-collections/community.routeros/pull/133).
      - api_modify, api_info - the default of the field ``ingress-filtering`` in ``interface
        bridge port`` is now ``true``, which is the default in ROS (https://github.com/ansible-collections/community.routeros/pull/125).
      - command, facts - commands do not timeout in safe mode anymore (https://github.com/ansible-collections/community.routeros/pull/134).
      known_issues:
      - api_modify - when limits for entries in ``queue tree`` are defined as human
        readable - for example ``25M`` -, the configuration will be correctly set
        in ROS, but the module will indicate the item is changed on every run even
        when there was no change done. This is caused by the ROS API which returns
        the number in bytes - for example ``25000000`` (which is inconsistent with
        the CLI behavior). In order to mitigate that, the limits have to be defined
        in bytes (those will still appear as human readable in the ROS CLI) (https://github.com/ansible-collections/community.routeros/pull/131).
      - api_modify, api_info - ``routing ospf area``, ``routing ospf area range``,
        ``routing ospf instance``, ``routing ospf interface-template`` paths are not
        fully implemeted for ROS6 due to the significat changes between ROS6 and ROS7
        (https://github.com/ansible-collections/community.routeros/pull/131).
      minor_changes:
      - api* modules - Add new option ``force_no_cert`` to connect with ADH ciphers
        (https://github.com/ansible-collections/community.routeros/pull/124).
      - api_info - new parameter ``include_builtin`` which allows to include "builtin"
        entries that are automatically generated by ROS and cannot be modified by
        the user (https://github.com/ansible-collections/community.routeros/pull/130).
      - api_modify, api_info - support API paths - ``interface bonding``, ``interface
        bridge mlag``, ``ipv6 firewall mangle``, ``ipv6 nd``, ``system scheduler``,
        ``system script``, ``system ups`` (https://github.com/ansible-collections/community.routeros/pull/133).
      - api_modify, api_info - support API paths ``caps-man access-list``, ``caps-man
        configuration``, ``caps-man datapath``, ``caps-man manager``, ``caps-man provisioning``,
        ``caps-man security`` (https://github.com/ansible-collections/community.routeros/pull/126).
      - api_modify, api_info - support API paths ``interface list`` and ``interface
        list member`` (https://github.com/ansible-collections/community.routeros/pull/120).
      - api_modify, api_info - support API paths ``interface pppoe-client``, ``interface
        vlan``, ``interface bridge``, ``interface bridge vlan`` (https://github.com/ansible-collections/community.routeros/pull/125).
      - api_modify, api_info - support API paths ``ip ipsec identity``, ``ip ipsec
        peer``, ``ip ipsec policy``, ``ip ipsec profile``, ``ip ipsec proposal`` (https://github.com/ansible-collections/community.routeros/pull/129).
      - api_modify, api_info - support API paths ``ip route`` and ``ip route vrf``
        (https://github.com/ansible-collections/community.routeros/pull/123).
      - api_modify, api_info - support API paths ``ipv6 address``, ``ipv6 dhcp-server``,
        ``ipv6 dhcp-server option``, ``ipv6 route``, ``queue tree``, ``routing ospf
        area``, ``routing ospf area range``, ``routing ospf instance``, ``routing
        ospf interface-template``, ``routing pimsm instance``, ``routing pimsm interface-template``
        (https://github.com/ansible-collections/community.routeros/pull/131).
      - api_modify, api_info - support API paths ``system logging``, ``system logging
        action`` (https://github.com/ansible-collections/community.routeros/pull/127).
      - api_modify, api_info - support field ``hw-offload`` for path ``ip firewall
        filter`` (https://github.com/ansible-collections/community.routeros/pull/121).
      - api_modify, api_info - support fields ``address-list``, ``address-list-timeout``,
        ``connection-bytes``, ``connection-limit``, ``connection-mark``, ``connection-rate``,
        ``connection-type``, ``content``, ``disabled``, ``dscp``, ``dst-address-list``,
        ``dst-address-type``, ``dst-limit``, ``fragment``, ``hotspot``, ``icmp-options``,
        ``in-bridge-port``, ``in-bridge-port-list``, ``ingress-priority``, ``ipsec-policy``,
        ``ipv4-options``, ``jump-target``, ``layer7-protocol``, ``limit``, ``log``,
        ``log-prefix``, ``nth``, ``out-bridge-port``, ``out-bridge-port-list``, ``packet-mark``,
        ``packet-size``, ``per-connection-classifier``, ``port``, ``priority``, ``psd``,
        ``random``, ``realm``, ``routing-mark``, ``same-not-by-dst``, ``src-address``,
        ``src-address-list``, ``src-address-type``, ``src-mac-address``, ``src-port``,
        ``tcp-mss``, ``time``, ``tls-host``, ``ttl`` in ``ip firewall nat`` path (https://github.com/ansible-collections/community.routeros/pull/133).
      - api_modify, api_info - support fields ``combo-mode``, ``comment``, ``fec-mode``,
        ``mdix-enable``, ``poe-out``, ``poe-priority``, ``poe-voltage``, ``power-cycle-interval``,
        ``power-cycle-ping-address``, ``power-cycle-ping-enabled``, ``power-cycle-ping-timeout``
        for path ``interface ethernet`` (https://github.com/ansible-collections/community.routeros/pull/121).
      - api_modify, api_info - support fields ``jump-target``, ``reject-with`` in
        ``ip firewall filter`` API path, field ``comment`` in ``ip firwall address-list``
        API path, field ``jump-target`` in ``ip firewall mangle`` API path, field
        ``comment`` in ``ipv6 firewall address-list`` API path, fields ``jump-target``,
        ``reject-with`` in ``ipv6 firewall filter`` API path (https://github.com/ansible-collections/community.routeros/pull/133).
      - api_modify, api_info - support for API fields that can be disabled and have
        default value at the same time, support API paths ``interface gre``, ``interface
        eoip`` (https://github.com/ansible-collections/community.routeros/pull/128).
      - api_modify, api_info - support for fields ``blackhole``, ``pref-src``, ``routing-table``,
        ``suppress-hw-offload``, ``type``, ``vrf-interface`` in ``ip route`` path
        (https://github.com/ansible-collections/community.routeros/pull/131).
      - api_modify, api_info - support paths ``system ntp client servers`` and ``system
        ntp server`` available in ROS7, as well as new fields ``servers``, ``mode``,
        and ``vrf`` for ``system ntp client`` (https://github.com/ansible-collections/community.routeros/pull/122).
      release_summary: Feature release improving the ``api*`` modules.
    fragments:
    - 120-api.yml
    - 121-api.yml
    - 122-api.yml
    - 123-api.yml
    - 124-api.yml
    - 125-api.yml
    - 126-api-capsman.yml
    - 127-logging.yml
    - 128-api.yml
    - 129-api-ipsec.yml
    - 130-api-modify-builtin.yml
    - 131-api.yml
    - 133-api.yml
    - 134-command-safemode.yml
    - 2.4.0.yml
    release_date: '2022-11-18'
  2.5.0:
    changes:
      bugfixes:
      - api_modify - ``address-pool`` field of entries in API path ``ip dhcp-server``
        is not required anymore (https://github.com/ansible-collections/community.routeros/pull/137).
      minor_changes:
      - api_info, api_modify - support API paths ``interface ethernet poe``, ``interface
        gre6``, ``interface vrrp`` and also support all previously missing fields
        of entries in ``ip dhcp-server`` (https://github.com/ansible-collections/community.routeros/pull/137).
      release_summary: Feature and bugfix release.
    fragments:
    - 137-api.yml
    - 2.5.0.yml
    release_date: '2022-12-04'
  2.6.0:
    changes:
      bugfixes:
      - api_modify - do not use ``name`` as a unique key in ``ip dns static`` (https://github.com/ansible-collections/community.routeros/issues/141).
      - api_modify, api_info - do not crash if router contains ``regexp`` DNS entries
        in ``ip dns static`` (https://github.com/ansible-collections/community.routeros/issues/141).
      minor_changes:
      - api_modify, api_info - add field ``regexp`` to ``ip dns static`` (https://github.com/ansible-collections/community.routeros/issues/141).
      - api_modify, api_info - support API paths ``interface wireguard``, ``interface
        wireguard peers`` (https://github.com/ansible-collections/community.routeros/pull/143).
      release_summary: Regular bugfix and feature release.
    fragments:
    - 142-dns-regexp.yml
    - 143-add-wireguard.yml
    - 2.6.0.yml
    release_date: '2023-01-01'
  2.7.0:
    changes:
      bugfixes:
      - api_modify, api_info - defaults corrected for fields in ``interface wireguard
        peers`` API path (https://github.com/ansible-collections/community.routeros/pull/144).
      minor_changes:
      - api_modify, api_info - support API paths ``ip arp``, ``ip firewall raw``,
        ``ipv6 firewall raw`` (https://github.com/ansible-collections/community.routeros/pull/144).
      release_summary: Bugfix and feature release.
    fragments:
    - 144-paths.yml
    - 2.7.0.yml
    release_date: '2023-01-14'
  2.8.0:
    changes:
      bugfixes:
      - api_info, api_modify - fix default and remove behavior for ``dhcp-options``
        in path ``ip dhcp-client`` (https://github.com/ansible-collections/community.routeros/issues/148,
        https://github.com/ansible-collections/community.routeros/pull/154).
      - api_modify - fix handling of disabled keys on creation (https://github.com/ansible-collections/community.routeros/pull/154).
      - various plugins and modules - remove unnecessary imports (https://github.com/ansible-collections/community.routeros/pull/149).
      minor_changes:
      - api_modify - adapt data for API paths ``ip dhcp-server network`` (https://github.com/ansible-collections/community.routeros/pull/156).
      - api_modify - add support for API path ``snmp community`` (https://github.com/ansible-collections/community.routeros/pull/159).
      - api_modify - add support for ``trap-interfaces`` in API path ``snmp`` (https://github.com/ansible-collections/community.routeros/pull/159).
      - api_modify - add support to disable IPv6 in API paths ``ipv6 settings`` (https://github.com/ansible-collections/community.routeros/pull/158).
      - api_modify - support API paths ``ip firewall layer7-protocol`` (https://github.com/ansible-collections/community.routeros/pull/153).
      - command - workaround for extra characters in stdout in RouterOS versions between
        6.49 and 7.1.5 (https://github.com/ansible-collections/community.routeros/issues/62,
        https://github.com/ansible-collections/community.routeros/pull/161).
      release_summary: Bugfix and feature release.
    fragments:
    - 153-ip_firewall_layer7-protocol.yml
    - 154-ip-dhcp-client-dhcp-options.yml
    - 156-ip_dhcp-server_network.yml
    - 158-ipv6_settings-disable.yml
    - 159-snmp_community.yml
    - 161-workaround-prompt-with-space.yml
    - 2.8.0.yml
    - remove-unneeded-imports.yml
    release_date: '2023-03-23'
  2.8.1:
    changes:
      bugfixes:
      - facts - do not crash in CLI output preprocessing in unexpected situations
        during line unwrapping (https://github.com/ansible-collections/community.routeros/issues/170,
        https://github.com/ansible-collections/community.routeros/pull/177).
      release_summary: Bugfix release.
    fragments:
    - 177-facts-parsing.yml
    - 2.8.1.yml
    release_date: '2023-06-14'
  2.8.2:
    changes:
      bugfixes:
      - api_modify, api_info - add missing parameter ``tls`` for the ``tool e-mail``
        path (https://github.com/ansible-collections/community.routeros/issues/179,
        https://github.com/ansible-collections/community.routeros/pull/180).
      release_summary: Bugfix release.
    fragments:
    - 180-fix-tls-in-tool-email.yml
    - 2.8.2.yml
    release_date: '2023-06-19'
